Library       Calculate

Bending Design of RC Rectangular Section
According to Eurocode: EN 1992-1-1

beam-bending.png

Design bending moment - MEd = kN·m

Cross section dimensions

Width - b = mm, Height - h = mm

Concrete cover to the center of reinforcement - d1 = mm

Material properties

[EN 1992-1-1, Table 3.1]

Concrete

Characteristic compressive cylinder strength - fck = MPa

Partial safety factor for concrete - γc = 1.5 , αcc =

Steel

Characteristic yield strength - fyk = MPa

Limit compression zone depth - ξlim =

(enter ξyd for elastic or 0.45 for plastic analysis)


Substitute